Presentation Using A Microscope - Elmo TT-02RX Manual De Instrucciones

Presentation using a Microscope

n Setting up a microscope
Place an object such as a prepared slide on the microscope, and then look into the
microscope and adjust the focus. Install the supplied microscope attachment.
n Setting the main unit
Connect the main unit to a projector or a PC monitor and then turn on the power for the
main unit.
n Changing to Microscope mode
From the OSD, select [Microscope] → [Set].
N o t e
• Be careful not to hit the main unit lens with the microscope attachment.
• When changing to microscope mode, [Graphics1] is automatically selected as the
[Image Mode].
n Adjusting the focus
The [AF] button on the main unit or on the remote control focuses the camera on the object.
n Adjusting the brightness
Adjust the brightness with the mirror on the microscope.
Adjust
Adjust
English
P.45