Cleaning And Maintenance; Accessories And Replacement Parts - Beurer BM 54 Instrucciones De Uso

Step 1: BM 54
Activate Bluetooth
ter "6.2 Setting the hour format, date, time and
Bluetooth®").
Step 2: "beurer HealthManager" app
In the "beurer HealthManager" app, add the BM
54 under "Settings/My devices".
Step 3: BM 54
Take a measurement.
Step 4: BM 54
Data transfer immediately fol-
lowing a measurement:
• If Bluetooth data transfer
®
has been activated, the da-
ta is transferred after having
confirmed the user memo-
ry by pressing the START/
STOP button .
on your device (see chap-
®
Step 4: BM 54
Data transfer at a later
point:
• Go to memory mode
(chapter 7.5). Select the
desired user memory. The
Bluetooth transfer starts
®
automatically.
The "beurer HealthManager" app must be activated to
allow data transfer.
If your smartphone has a protective cover, remove this to ensure
that there is no interference during the transfer. Begin the data
transfer in the "beurer HealthManager" app.

8. Cleaning and maintenance

• Clean the device and cuff carefully using a slightly damp cloth
only.
• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and cuff under wa-
ter, as this can cause liquid to enter and damage the device
and cuff.
• If you store the device and cuff, do not place heavy objects on
the device and cuff. Remove the batteries. The cuff line should
not be bent sharply.

9. Accessories and replacement parts

Accessories and replacement parts are available from the corre-
sponding service address (according to the service address list).
Please state the corresponding order number.
Designation
Universal cuff (22-44 cm)
33
Item number and/or
order number
163.952