And Playing Back Music - Yamaha CD-NT670 Manual De Instrucciones

Ocultar thumbs Ver también para CD-NT670:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 297
Connecting a paired
device

and playing back music

If the unit is connected to another device via Bluetooth
connection, terminate that connection (see "Terminating
the Bluetooth connection" on the right) before
connecting to the target device.
1
Perform Bluetooth connection.
• Connecting from the unit: Press BLUETOOTH.
• Connecting from the
Turn on the Bluetooth function of the connected
device, and select the unit (network name of the
unit) from the available device list.
• The Bluetooth indicator lights up when a
connection is established.
2
Play back music on the connected
device.
1
device:
1
2
,
Indicator
Playing back music via Bluetooth connection
• Decrease the volume of the amplifier
connected to the unit before playback.
Otherwise, playback volume may be too loud.
• If connecting from the unit, the unit searches for the
Bluetooth device connected the last time. In this
case, make sure that device's Bluetooth function is
turned on.
Terminating the
connection
• Bluetooth connection can be terminated by either
one of the following.
- Terminate the Bluetooth connection from the
connected device.
- Change to another input source.
- Press and hold
BLUETOOTH
.
- Set the unit to standby mode.
27
En

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Cd-nt670d

Tabla de contenido