Descargar Imprimir esta página

After-Sales Service - S&P COR-IND M 1000 W 27 Instrucciones De Uso

Ocultar thumbs Ver también para COR-IND M 1000 W 27:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
OPERATION
REMOTE CONTROL CONNECTION.
(This control is sold separately as an
accessory).
CURTAIN
MODEL
COR-IND M 1000 W 27
COR-IND M 1500 W 35
IF CONNECTING BETWEEN TWO OR
MORE AIR CURTAINS OF THE SAME
MODEL (MAX. 5 UNITS), PLEASE REFER
TO WIRING DIAGRAM IN Fig. 5.
NOTE:
In the case of multiple connection, the
Installer must consider the increased
number of feeders based on the number of
connected units.
MAINTENANCE
These air curtains do not need any special
maintenance, however the following is
recommended:
1- Keep the inlet and outlet grilles clean.
Clean them with a dry cloth (avoid using
solvents or abrasive detergents)
2- Once a year, the inside parts should be
cleaned by a qualified electrician.
3- In order to carry out any maintenance
tasks, the omnipolar cut-off device must be
activated to ensure that none of the parts
inside the apparatus are live.
AFTER SALES SERVICE
In the event of any problems with the unit,
it is advised to contact your S&P dealer.
Any manipulation of the appliance by
personnel not appointed by S&P will cancel
the guarantee.
S&P reserves the right to modify the
product without prior notice.
REMOTE CONTROL
MODEL
CR-20
CR-20
8
8

Publicidad

loading

Este manual también es adecuado para:

Cor-ind m 1500 w 35