Standard Accessories - Hitachi AW 18DBL Instrucciones De Manejo

English
Unlock
Trigger gun
Variable nozzle
High-pressure hose (3 m)
Nozzle cleaner pin
Water feed connector
(Optional accessories...sold separately)
One-touch joint (black) (commercially available)
One-touch joint (for narrow-diameter hoses)
(commercially available)
• Faucet hose (pressure-resistant type)
(commercially available)
• Narrow-diameter faucet hose (commercially
available)
Faucet connector (commercially available)
Washer power switch ON
Washer power switch OFF
Remaining battery indicator switch
SPECIFICATIONS
POWER TOOL
Model
Voltage
Discharge pressure (1 MPa: 10.2 kgf/cm
Water discharge
Permissible water temperature
Water supply method
Tank capacity
Motor
Dimensions (Length x Width x Depth)
Weight*
1
*1 Weight (According to EPTA-Procedure 2003): Excluding the battery, trigger gun, high-pressure hose, variable nozzle.
CHARGER
Model
Charging voltage
Weight
NOTE
Due to HITACHI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
NOTE
Do not give a strong shock to the switch panel or break it.
It may lead to a trouble.
)
2
UC18YSL3
14.4 V – 18 V
0.6 kg
The battery remaining power is nearly empty.
Recharge the battery soonest possible
The battery remaining power is a half.
The battery remaining power is enough.
Prohibited action

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the
accessories listed on page 281.
Standard accessories are subject to change without notice.
APPLICATIONS
○ Cleans screen doors, window glass, fl oors, walls, etc.
○ Cleans automobiles, motorbikes, etc.
○ Cleans mud off gardening equipment and agricultural
equipment.
0.5 – 2.0 MPa
0.5 – 1.2 L/min
40°C or less
Tank water supply / Faucet connection / Storage water supply
302 mm × 254 mm × 473 mm
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red (At 1-second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 2.
3. Charging
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up in green. (See Table 1)
(1) Charge indicator lamp indication
The indications of the charge indicator lamp will be as
shown in Table 1, according to the condition of the
charger or the rechargeable battery.
6
AW18DBL
18 V
8 L
DC motor
4.5 kg