Lockncharge iQ 20 Cart Manual De Instrucciones página 3

STEP 1 - Unpacking the iQ 20 Cart
After unpackaging, open the sliding lid.
NOTE: If you are supplying your own cables, follow Step 2 to install.
If you purchased the Cart with cables pre-installed, go to Step 3.
STEP 2 - Routing the device cables
Undo the two knobs to release the cable
management bracket.
Connect the device cables to each USB port of the
iQ 5 Sync Charge Box (there are 2 iQ 5 Sync Charge
Boxes per side, 4 in total).
INSTRUCTION MANUAL
Remove the Baskets and the accessories box.
After undoing the two knobs, remove the cable
management bracket from the iQ 20 Cart.