Installing The Wind Turbine - Bornay 600 Manual De Usuario

Reserve brake option: To guarantee safety
in the installation, an auxiliary brake can be
incorporated in the regulator which would
brake the wind turbine when you need to
leave it deactivated for some reason. This braking system involves uniting the
wind turbine's three phases.
Warning signs:
The regulator detects the voltage at input to the batteries and it carries out
auto-configuration as long as this voltage is permitted within the power
programmed. If the battery voltage is not permitted for the power programmed,
a message appears stating that the voltage is not correct.
CONFIGURACION
INCORRECTA
For example, if the regulator is for a
6000W wind turbine, it can only work
with 48V batteries, so if it detects
that the battery voltage is 12V or
24V, it will show an error message.
This also occurs if the batteries are
very run down.

Installing the Wind Turbine

Before assembling the wind turbine
on the tower,
installation must be completed, as
the electrical
Bornay 600 – Rev 6.0 - P 56
In strong wind, never leave the
wind turbine turning in braked
position.