en
Press the depression at the top of the
robot vacuum cleaner.
The lid of the storage compartment will
open.
Unlatch the dust box by lifting the
handle upwards.
Remove the dust box.
Press one or both release buttons in
the direction of the arrow and remove
the dust box lid.
Empty the dust box.
Refit the lid and close the dust box,
making sure it clicks into place.
Place the dust box into the robot va-
cuum cleaner with the handle lifted
up and latch it into place by pushing
the handle back down.
Close the storage compartment lid
and press down on the depression in
order to lock it.
Cleaning the dust box
Clean the dust box as required.
58
A cleaning tool is located at the top of
the dust box lid.
Remove the cleaning tool.
Clean the dust box and the underside
of the lid using the cleaning tool.
Cleaning the exhaust filter
Clean the exhaust filter as required.
The exhaust filter compartment is loc-
ated in the dust box.
Remove the lid from the dust box.
Fold out the filter unit from the dust
box.
Remove the pre-filter and clean it as
required using the cleaning tool.