Dörr DSL-40 Manual De Instrucciones página 12

07 | OPERATION
07.1 TURNING ON/OFF
Press the main switch (10) to turn the DSL-40 RGB light on or o . Turn the main switch to the left or to the right (10) to adjust settings.
07.2 BUTTON H/S (SETTING HUE AND SATURATION)
H/S mode red = setting of hue
Press the button H/S (6). If it lights up red, turn the main switch (10) to the left or right to set the desired colour.
Possible settings from 0 – 199:
Colours Orange
From approx. 5
H/S mode green = setting of saturation
After setting the desired color as described above, press the
left or right, the saturation of the hue can be adjusted from 0 - 100%.
07.3 BUTTON Bri (SETTING OF BRIGHTNESS)
To adjust the brightness, press the button
can be adjusted from 20 - 100%.
07.4 BUTTON Tem (SETTING OF COLOUR TEMPERATURE)
Please note: The setting of colour temperature is only possible in white light mode.
Press the button Tem (9) to switch to the white light mode (button lights up white).
By turning the main switch (10) to the left or right, the colour temperature can be adjusted from 3200 K – 5500 K.
The LCD display (5) shows the values as follows:
For example: 32 = 3200 K, 45= 4500 K, 55 = 5500 K etc.
07.5 BUTTON Bat (BATTERY CAPACITY INDICATOR)
If you operate the DSL-40 RGB light with battery, press the button
The LCD display (5) shows the values as follows: P0 (=0% remaining charge) to P9 (=90% remaining charge)
If you press the button Bat
CAUTION
Press the main switch (10) to turn o the DSL-40 RGB light after usage.
Yellow Green
20 50
Bri (7), so it lights up white. By turning the main switch (10) to the left or right, the brightness
(8) while operating he DSL-40 RGB light with power adapter, the LCD display (5) will indicate "dc".
Turquoise Blue
75 90
H/S button (6), so it lights up green. By turning the main switch (10) to the
Bat (8) to indicate the remaining charge in the LCD display (5).
12
Purple Pink
145 180
Red
198