Mounting On A Tripod - Dörr DSL-40 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

and the charging process has started, the LED charging indicator (16) lights up red. When battery is fully charged, the LED charging
indicator (16) turns green. Slide the Li-Ion battery backwards and remove it from the charging slot. Disconnect the battery charger from
the electrical outlet.
CAUTION
Never leave the battery charger unattended while charging the battery. After charging, disconnect the charger from
the power supply.
NOTE
To avoid deep-discharge of the Li-Ion battery when DSL-40 RGB light is not in use
for a longer period, please charge Li-Ion battery up to approx. 60%.
Replacement battery from DÖRR optionally available from DÖRR in stores: DÖRR Li-Ion battery (Replace-) NP-F750
05.2 INSERTING THE LI-ION BATTERY INTO THE DLS-40 RGB LIGHT
CAUTION
Before inserting or removing the Li-Ion battery, make sure that the DSL-40 RGB light is turned o .
Insert the Li-Ion battery (21) into the battery slot (2) with the battery contacts (22) facing to the battery contact pins (3). Slide the bat-
tery fully forward until it touches the battery contact pins (3).
To remove the Li-Ion battery (21), slide the battery backwards and remove it out of the battery slot.
05.3 OPERATION WITH POWER SUPPLY
Alternatively, the DSL-40 RGB light can be operated with the supplied power supply (23):
First connect the power cable (20) to the cable socket (25) of power adapter. Insert the connector plug (24) of power adapter to the
power adapter socket (4) of the DSL-40 RGB light and connect with an electrical outlet.
NOTE
While operating with the power supply, the Li-Ion battery can stay inside the battery slot.
CAUTION
Press the main switch (10) to turn o the DSL-40 RGB light after using.
06 |
MOUNTING

06.1 MOUNTING ON A TRIPOD

For mounting on a tripod, a ¼ inch tripod mount (12) is located at both ends of the DSL-40 RGB light.
NOTE
Various tripods from DÖRR optionally available in stores.
06.2 HANGING UP
To hang up the DSL-40 RGB light in suitable places in the studio or outdoor, screw the supplied hook (13) in one of the ¼ inch tripod
mounts (12).
06.3 WRIST STRAP
To avoid dropping the DSL-40 RGB light while doing shootings like for e.g. Light Painting, we recommend to attach the supplied wrist
strap (14) to the eyelet (11). The wrist strap can be adjusted to the size of your wrist.
Item-No. 980152
11

Publicidad

Tabla de contenido
loading

Tabla de contenido