Taking Pictures; Weee Information - Dörr Ultra 80 Manual De Instrucciones

Anillo de luz led con flash
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

07.2 TAKING PICTURES

Move the On/Off switch (8) to position
or to
for the usage of both LED ring light and flash.
We recommend taking pictures in aperture priority mode, so you can defi-
ne the aperture manually and thus select the desired focus range.
If you wish to achieve a higher depth of field, the additional usage of the
flash is recommended. This way you can close 1 full aperture step.
Recommended range of use: approx. 3 to 100 cm.
07.3 CAMERA SETTINGS
White Balance: Set your camera to auto white balance mode (AWB). If
a more accurate setting is required you can do a manual white balance
metering (PRE).
Exposure: For macro and close-up shots we recommend to select the
aperture manually in order to keep control of the depth of focus. Adjust
the shutter speed manually (M) or with aperture-priority mode (A).
Focus: We recommend manual focus adjustment for close-up and macro
shots.
Note
In order to avoid blurred images, we recommend the use of a tripod.
08 | CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We
recommend a soft, slightly damp microfiber cloth to clean the outer parts
of the device. Turn off the device and remove batteries before cleaning.
Store the device in a dust-free, dry and cool place. This device is not a toy
– keep it out of reach of children. Keep away from pets.
09 | SPECIFICATIONS
Flash control
manually
Flash duration approx.
1/700 - 1/1000 s
Colour temperature approx. 5.500 K - 6.500 K
Colour rendering index (CRI) > 95 R
Illuminance approx.
450 Lux/1 m with 80 LEDs
4x 1,5V Mignon batteries or rechargeable
Power supply
batteries of the same type
150 minutes with 1 set of fresh batteries,
depending on type
Operating time approx.
90 minutes with 1 set of rechargeable
batteries, depending on type
Recommended distance
3 to 100 cm
approx.
Adapter rings for 52, 55, 58, 62, 67
Connection
and 72 mm
Control unit: 9,3 x 6,7 x 6,7 cm
Dimensions approx.
LED ring light: 14,2 x 11,9 x 2,8 cm
Weight approx.
260 g (w/o batteries)
for usage of the LED ring light
a
(not included)
10 | SCOPE OF DELIVERY
1x LED ring light with flash
1x Control unit
1x Spiral cable
each 1x adapter ring 52, 55, 58, 62, 67, 72 mm
1x Instruction manual
11 | DISPOSAL, CE MARKING
11.1
DISPOSAL OF BATTERIES/ACCUMULATORS
Batteries are marked with the symbol of a crossed out bin. This symbol
indicates that empty batteries or accumulators which can no longer be
charged should not be disposed of with household waste. Waste batteries
may contain harmful substances that can cause damage to health and to
the environment. Please use the return and collection systems available in
your country for the disposal of the waste batteries.
11.2

WEEE INFORMATION

The Waste Electrical and Electronic Equipment Directive (WEEE Directive)
is the European community directive on waste electrical and electronic
equipment, which became European law in February 2003. The main pur-
pose of this directive is to prevent electronic waste. Recycling and other
forms of waste recovery should be encouraged to reduce waste. The
symbol (trash can) on the product and on the packing means that used
electrical and electronic products should not be disposed of with general
household waste. It is your responsibility to dispose of all your electronic or
electrical waste at designated collection points. Disposing of this product
correctly will help to save valuable resources and it is a significant contri-
bution to protect our environment as well as human health. For more infor-
mation about the correct disposal of electrical and electronic equipment,
recycling and collection points please contact your local authorities, waste
management companies, your retailer or the manufacturer of this device.
11.3 ROHS CONFORMITY
This product is compliant with the European RoHS directive for the restric-
tion of use of certain hazardous substances in electrical and electronic
equipment and its amendments.
11.4
CE MARKING
The CE marking complies with the European standards and indicates that
the product meets the requirements of the applicable EU directives.
07

Publicidad

Tabla de contenido
loading

Tabla de contenido