Setting The Start Address And The Number Of Dmx Channels; Dmx Functions - IMG STAGELINE LED-162RGBW Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
5.3.2 Setting the start address and
the number of DMX channels
For separate control of all DMX units connected
to the light controller, each unit requires a start
address of its own . Example: If the first DMX
channel of the LED-162RGBW is to be controlled
by DMX address 6, set the start address on the
LED-162RGBW to 6 . The other DMX channels
of the LED-162RGBW will then be automatically
assigned to the subsequent addresses . Examples
with different start addresses:
Number
Start
of DMX
addres
channels
1
1
6
512
1
4
6
509
Fig. 8 DMX address assignment
1) Switch on the DMX mode: Press the button
MENU repeatedly until
on the display .
2) Press the button ENTER . The display will indi-
cate the number of DMX channels (1 or 4) .
3) If required, change the number of DMX chan-
nels with the button UP or DOWN .
4) Press the button ENTER again . The start ad-
dress will be indicated (e . g .
5) If required, change the start address with the
button UP or DOWN .
6) Press the button ENTER to save the settings .
7) Set the same start address and the same
number of channels for all additional LED-
162RGBW that are to be synchronously
controlled .
The light effect unit can now be controlled via
DMX . The LED DMX (9) will start flashing to
indicate the DMX mode . The DMX functions
can be found in the following chapter, fig . 9 .
When the LED-162RGBW does not receive any
control signal, the display or a dot on the display
will start flashing .
14
Next possible
Addresses
address for
used by the
the subsequent
LED-162RGBW
DMX unit
1
2
6
7
512
1 – 4
5
6 – 9
9
509 – 512
(DMX) appears
) .

5.3.3 DMX functions

Channel
DMX value Function
1-channel mode
000 – 009 Blackout (light off)
010 – 050
051 – 090 Rotating light pattern
091 – 130 White running light
1
131 – 170
171 – 210 Rotating light pattern
211 – 255 White running light
4-channel mode
000 – 005 Light pattern off
006 – 020 Red only
021 – 035 Green only
036 – 050 Blue only
051 – 065 White only
066 – 080 Red and green
081 – 095 Red and blue
096 – 110 Red and white
1
111 – 125 Green and blue
light pattern
126 – 140 Green and white
141 – 155 Blue and white
156 – 170 Red, green and blue
171 – 185 Red, green and white
186 – 200 Green, blue and white
201 – 215 Red, green, blue and white
216 – 229 1 colour, autom. change
230 – 255 1 – 4 colours, autom. change
000 – 005 Light pattern does not flash
2
flashing
006 – 255 Flashing, slow  fast
000 – 005 No rotation of light pattern
3
006 – 127 Rotation angle (0 – 330°)
rotation
128 – 255 Rotation, slow  fast
000 – 009 Running light LEDs off
010 – 019 Pattern 1, slow  fast
020 – 029 Pattern 2, slow  fast
4
...
running light
160 – 169 Pattern 16, slow  fast
170 – 179 Pattern 17, slow  fast
180 – 255 All LEDs light up constantly
Fig. 9 DMX functions
Rotating light pattern
and white running light
Rotating light pattern
and white running light
...

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

38.7470

Tabla de contenido