Lenco BTL-450 White Manual Del Usuario página 11

11. Trouble Shooting
Problem
Power
System does not turn on or
does not respond to the
remote control.
Remote control
No functions or short range.
The sound is distorted
No sound can be heard
12. Technical Information
AC power source
Remote Control:
Unit Output Power:
Speaker unit
The Max. power consumption :
Operation temperature:
Aux:
Power Management
The Power Consumption in standby:
Note:
As a result of continuous improvements, the design and specifications of the product within the
packaging might differ slightly from the unit illustrated on the packaging.
For more information, please contact the local authority or your retailer where you purchased the
product.
This product operates at 2400 - 2483.5 MHz and is designated only to be used inside a normal
household environment. This product is suited for this purpose within all EU counties.
Remedy
-Make sure the AC power plug is connected to the wall socket
outlet properly and that it has power.
-If this does not help, leave the unit unplugged before seeking
advice.
-Insert new batteries.
-Aim the remote directly towards the remote sensor.
Check the volume setting on both the speaker and your device
and adjust the volume to a suitable level.
Check whether the volume is set in MUTE mode, and then
adjust the volume level in desired level.
AC 230V~50Hz
3V (Lithium CR2025 x 1pc.)
Total 60 Watt
2 x 3.5" speakers + 1 x 4" speaker
Max 60W
0°C to + 40°C
3.5mm stereo jack
15 minutes after no signal from unit
≤1W
11