Introduction; Product Functions; Alarm Operation - Toyota VSS 1 Manual Del Propietário

Introduction

This alarm system is operated by the original high security remote control or smart key described
in the car's owner's manual. To programme extra remote controls consult your Toyota authorised
retailer.
The alarm system can only be armed and disarmed with original car remote control. The
protection of your car is assured by interior movement and perimetric sensors. The alarm system is
self-protected against system attack.
During an alarm, the alarm siren, the vehicle horn (if applicable on your car), the blinkers, and the
interior light are activated.

Product functions

The Alarm system performs the following functions:
• Perimetric protection (doors, boot, and bonnet).
• Interior and window breakage protection (by interior movement sensor).
• Alarm system tampering protection.
• Unauthorised engine starting car protection.
• Self-powered alarm system.
• Acoustic and visual alarm signalization.
• Alarm system status and diagnostic indication light (LED).
• Additional protection features can be added (Lift-up monitor module).

Alarm operation

The alarm is activated in the following situations:
• A locked door or boot is opened in any way other than using the smart entry function or
original remote control.
• The bonnet is opened while the car is locked.
• The intrusion sensor is activated: When the sensor detects something moving inside the car, or
a window is broken.
• The battery terminal is disconnected while the alarm system is activated.
Remarks
The intrusion sensor may be triggering by any of the following:
• Dangling accessories.
• Automatic or high pressure car washes.
• The impact of hail, lightning strikes, or other kinds of impact or continuous vibrations.
• Any open window or sliding roof.
The intrusion sensor can be deactivated as you can read in paragraph 1.5.
VSS1 5