Control Panel & Features - Maytag 4GMEDC10 Manual De Uso Y Cuidado

CONTROL PANEL & FEATURES
CYCLE KNOB
1
Use Cycle Knob to select available cycles on your dryer.
Turn the knob to select a cycle for your laundry load. See
"Cycle Guide" for detailed descriptions of cycles.
TIMED DRY
Will run the dryer for the specified time on the control.
On models with a selectable temperature knob, you may
choose a setting based on the fabrics in your load. On
some models, temperature is included in the cycle
selections. Drying time and temperature will depend
on your dryer model.
AUTOMATIC DRY
Senses moisture in the load or air temperature and shuts
off when the load reaches the selected dryness level.
Gives the best drying in the shortest time. Drying time
will vary based on fabric type, load size, and temperature
setting.
Not all features and options are available on all models.
Appearance may vary.
1
1
2
TEMPERATURE / FABRIC (on some models)
Select a drying temperature based on the fabrics in your
load. If you are unsure of the temperature to select for a
load, select the lower setting rather than the higher setting.
3
PUSH TO START/END OF CYCLE SIGNAL
The End of Cycle Signal produces an audible sound when
the drying cycle is finished. Promptly removing clothes at
the end of the cycle reduces wrinkling.
Turn the END OF CYCLE SIGNAL knob to select the desired
setting (On or Off). Press the PUSH TO START knob to start
the dryer.
2 3
3
5