ION LP 2 CD Para El Usuario página 16

TROUBLESHOOTING
PROBLEM
My recordings sound loud
and distorted.
I can barely hear
recorded audio when I play it
back.
My records are playing at an
unusual pitch.
I don't hear anything when I
try to play or record audio
from my vinyl records.
I don't hear anything when I
try to play or record external
sources connected to the
Line In.
I get a "Not enough space on
blank CDR" message.
I get a "Too many tracks in
Flash to REC" message.
I get a "Can't Record Flash is
Full" message.
I can't hear my record
playing.
I am experiencing poor sound
quality.
My recording came out as
one continuous, long track,
instead of individual tracks.
LP 2 CD HOT KEYS
BUTTON COMBINATION
RECORD + STOP
RECORD + PLAY
CAUSE
Recording level was too loud.
the
Recording level was too soft.
RPM switch not set correctly.
PHONO / LINE switch set to
Line, instead of Phono.
PHONO / LINE switch set to
Phono, instead of Line.
Internal Flash
contents exceed
maximum capacity of the CD-
R you are attempting to burn.
Internal Flash Player is filled
to capacity.
LP 2 CD is already playing
audio from CD or from the
Internal Flash Player.
Cartridge connection is not
secure.
Vinyl record is
scratched.
Auto Split menu option was
disabled.
DESCRIPTION
Forces system to load an OS (Operating System) upon startup.
Please visit www.ion-audio.com regularly for updates.
Restores the default system parameters.
It is important to carefully set your recording level prior to
recording. When you first press [RECORD] to enter Rec
Ready Mode, please check the level metering on the
display. Use the RECORD LEVEL knob to adjust the
level. At the loudest moments of the music, the meters
should hit the (-4) or (-2) mark but should not reach
(MAX). If the level of the audio signal is too "hot", you
will see (!) flash on the right side of the display.
Please set the RPM switch as appropriate for the record
you wish to play (33/45/78).
Set the PHONO / LINE switch to Phono to play and
record audio from the turntable.
Set the PHONO / LINE switch to Line to hear and record
audio from the external sources connected to the Line
In.
Erase tracks from Internal Flash Player which may have
already been burnt to a previous disc. In general, we
Player
recommend that you erase the player contents after
the
each successful burn.
Try a higher capacity CD-R. If using a 74min CD-R,
please try an 80min CD-R.
Erase tracks from the Internal Flash Player to free up
space.
Burn Internal Flash Player contents to CD-R, then erase
all tracks.
Press the [STOP] button to ensure that the unit is not
actively playing back or pausing a song.
Cartridge must be securely connected to the tonearm
whenever you are using the turntable.
dirty or Try dusting off and gently wiping the surface of the
record before playing it.
Enable Auto Split in the Menu options and try again.
See "Internal Flash Player Menu Options" section for
details.
Use the [SPLIT TRK] to manually split your recordings
into individual tracks.
Internal Flash Player" section for details.
14
SOLUTION
See "Splitting Tracks in the