Ic Statement (For Canada Only) - Hilti PS 1000 X-Scan Manual De Instrucciones

For users in the USA
Operation of this device is restricted to law enforcement,
fire and rescue officials, scientific research institutes,
commercial mining companies, construction companies
and private parties operating on behalf of these groups.
Operation by any other party is a violation of 47 U.S.C.
en
§ 301 and could subject the operator to serious legal
penalties.
Coordination requirements
1. UWB imaging systems require coordination through
the FCC before the equipment may be used. The
operator shall comply with any constraints on equip-
ment usage resulting from this coordination.
2. The users of UWB imaging devices shall supply de-
tailed operational areas to the FCC Office of Engi-
neering and Technology who shall coordinate this in-
formation with the Federal Government through the
National Telecommunications and Information Ad-
ministration. The information provided by the UWB
operator shall include the name, address and other
pertinent contact information of the user, the de-
sired geographical area of operation, and the FCC
ID number and other nomenclature of the UWB de-
vice. This material shall be submitted to the following
address:
Frequency Coordination Branch, OET
Federal Communications Commission
445 12th Street, SW
Washington, D.C. 20554
ATTN: UWB Coordination

9 IC statement (for Canada only)

9.1 IC statement (for Canada only)
This device complies with the requirements defined in
RSS-220 in conjunction with RSS-Gen of IC.
1. This device may not cause harmful interference.
8
3. Users of authorized, coordinated UWB systems may
transfer them to other qualified users and to different
locations upon coordination of change of ownership
or location to the FCC and coordination with existing
authorized operations.
4. The NTIA/FCC coordination report shall include any
needed constraints that apply to day-to-day opera-
tions. Such constraints could specify prohibited ar-
eas of operations or areas located near authorized
radio stations for which additional coordination is
required before operation of the UWB equipment.
If additional local coordination is required, a local
coordination contact will be provided. Ground Pen-
etrating Radar Coordination Notice And Equipment
Registration.
-Note- This form is only for domestic United States
users. Failure to do this is a violation of Federal law.
1. Date:
2. Company name:
3. Address:
4. Contact information [contact name and phone
number]:
5. Area of operation [state(s)]:
6. Equipment identification: PS 1000
FCC-ID: SDL-PS 1000R01
7. Receipt date of equipment:
Fax this form to the FCC at: 202-418-1944 or mail it
to:
Frequency Coordination Branch OET
Federal Communications Commission
445 12th Street, SW
Washington D.C., 20554
ATTN: UWB Coordination
Do not send this information to Hilti Corporation.
2. This device must accept any interference received,
including interference that may cause undesired op-
eration.
For users in Canada
This device shall be operated only where directed to the
ground or wall, and when in contact with the ground
or wall surface. This device shall be operated only by
law enforcement agencies, scientific research institutes,
commercial mining companies, construction companies,
and emergency rescue or fire-fighting organizations.