Controls - Hofmann monty 1270 Manual Del Operador

F
A
B
D
4.1-2
22
E
D
C
4.1-1
D
4.1-3
4.1

Controls

Before operating the machine ensure that you have
well understood the operation and function of all the
controls (Fig. 4.1-1).
A.
• Press down and release, WITH LEFT FOOT, the
first pedal from the left: the clamps of the turntable
will retract. Do it again: the clamps will expand. If
you press the pedal prior to the end of the stroke
and release, the clamps may be stopped in any
position.
B.
• Open the bead breaker arm. Press down and hold,
WITH LEFT FOOT, the second pedal from the
left: by doing this you operate the bead breaker
blade and the arm will move towards the machine.
Release the pedal: the bead breaker blade will
retract.
C.
• Press down and hold, WITH RIGHT FOOT, the first
pedal from the right: the turntable turns clockwise.
Lift the pedal and the turntable turns counter-
clockwise.
DANGER OF LEG TRAPPING
D.
• The lock handle enable the mount/demount tool to
be locked in the working position. Lower the lock
handle to unlock (Fig. 4.1-2) the vertical slide, lift
the handle to lock (Fig. 4.1-3).
E.
• Turn the adjustment knob (1, Fig. Fig. 4.1-1) for
positioning mount/demount head according to rim
diameter.
For machines without Tubeles wheel system:
F.
• Press bead seater/inflator pedal on left side of
the machine (2, Fig. Fig. 4.1-1): air will come from
inflation hose end.
WHEN OPERATING THE INFLATOR IT IS
MANDATORY TO WEAR EAR PROTECTORS
A N D S A F E T Y G L A S S E S TO P R E V E N T
CONTAMINATION FROM NOISE, DUST AND
CHIPS BLOWN BY THE AIR JETS.
Operator Manual