26
5
Mounting and demounting.
General precautions
CAUTION:
BEFORE MOUNTING A TIRE ON A RIM
ENSURE THE FOLLOWING RULES ARE
OBSERVED:
A- THE RIM MUST BE CLEAN AND IN GOOD
CONDITION: IF NECESSARY CLEAN AFTER
REMOVING ALL WHEEL-WEIGHTS INCLUDING
'TAPE WEIGHTS' INSIDE THE RIM.
B- THE TIRE MUST BE CLEAN AND DRY, WITH
NO DAMAGE TO THE BEAD AND THE CASING.
C- REPLACE THE RUBBER VALVE STEM WITH
A NEW ONE OR REPLACE THE 'O' RING IF
THE VALVE STEM IS MADE OF METAL.
D- LUBRICATION IS NECESSARY FOR
CORRECT MOUNTING OF THE TIRE AND
PROPER CENTERING. USE ONLY AN
APPROVED LUBRICANT FOR TIRES.
E- MAKE SURE THE TIRE IS THE CORRECT
SIZE FOR THE RIM.
Operator Manual