Preparing Your Hair - Imetec Bellissima MY PRO Magic Straight Brush PB11 100 Instrucciones De Uso

PREPARING YOUR HAIR

• Wash your hair as you would normally and brush it, untangling
any knots.
• Dry your hair and brush it from the roots to the ends.
INSTRUCTIONS FOR USE
• Connect the power cable (7) to the mains power supply.
• Press the on/off button (6) to turn the brush on.
• Select the desired temperature by pressing the "-/+" temperature
adjustment button (5). The temperature can be changed at any
time (between 160 °C and 210 °C) by pressing the "+" or "-"
buttons (5).
• After having selected the desired temperature, the button lock
can be activated by pressing and holding the "-" button (5) for
a few seconds. This function prevents temperature from being
changed accidentally when the brush is being used. The key-
shaped warning light (8) will appear on the display to show that
the button lock has been activated. To deactivate the lock, press
and hold the "-" button (5) again for a few seconds.
• The LCD display (8) will flash until the heated bristle plate (1)
reaches the set temperature. When the temperature is reached,
the LCD display (8) will remain lit.
USE
• Wash, dry and untangle your hair.
• Run the brush through your hair as you would a traditional brush,
starting from the roots and moving towards the ends, first with
the heated bristle plate (1) facing towards you, and then with the
bristles facing outwards.
• For best results we recommend:
• Dividing your hair into sections and working lock by lock.
• Holding each lock taut, gripping it with one hand near the ends.
• Passing the heated bristle plate (1) all the way through the
lock of hair.
• Running the brush from the roots to the ends, first with the
heated bristle plate (1) facing towards you, and then with the
bristles facing outwards.
• To style the ends, turn the brush 180° inwards or outwards
(depending on the desired effect), making sure they come into
full contact with the heated sides (2).
• Once you have finished styling your hair, turn the appliance off
by pressing the on/off button (6) and unplug the brush from the
socket.
are using the brush; this is caused by the evaporation of
excess moisture in the hair.
turns on automatically when the appliance is switched on.
3163_Q2301.indb 15
NOTE: It is normal for steam to develop when you
NOTE: The appliance is equipped with an ioniser (9) that
15
EN
22/05/18 10