Troubleshooting - JVC KW-XG700 Manual De Instrucciones

Ocultar thumbs Ver también para KW-XG700:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptom
• Sound cannot be heard from the speakers.
• The unit does not work at all.
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
• Disc cannot be played back.
• CD-R/CD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be skipped.
• Disc can neither be played back nor ejected.
• Disc sound is sometimes interrupted.
• "NO DISC" appears on the display.
• Disc cannot be played back.
• Noise is generated.
• A longer readout time is required ("CHECK"
keeps flashing on the display).
Remedy/Cause
• Adjust the volume to the optimum level.
• Check the cords and connections.
Reset the unit (see page 3).
Store stations manually.
Connect the antenna firmly.
Insert the disc correctly.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which
you used for recording.
• Unlock the disc (see page 10).
• Eject the disc forcibly (see page 3).
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
Insert a playable disc into the loading slot.
• Use a disc with MP3/WMA/AAC tracks recorded in
the format compliant with ISO 9660 Level 1, Level 2,
Romeo, or Joliet.
• Add the extension code <.mp3>, <.wma>, or
<.m4a> to the file names.
Skip to another track or change the disc. (Do not add
the extension code <.mp3>, <.wma>, or <.m4a> to
non-MP3/WMA/AAC tracks.)
Do not use too many hierarchies and folders.
Continued on the next page
REFERENCES
35

Publicidad

Tabla de contenido
loading

Tabla de contenido