Recalling Measurements In Memory - HealthSmart 04–875–001 Manual De Instrucciones

RECALLING MEASUREMENTS IN MEMORY

You can recall up to 120 total measurements in memory (60
per memory bank). These measurements can be shared with
your physician or trained healthcare professional.
1. Press and release the MEMORY button. The unit will
display either U1 or U2 depending upon the user bank
selected. It will also show how many measurements are
stored within that bank, Fig. 1.
2. To select the appropriate user bank press the POWER
button to switch between U1 and U2.
3. 3. Once the desired user memory bank is selected, press
the MEMORY button again to scroll through the saved
measurements. After you've scrolled through all the
readings, the unit will automatically turn off.
NOTE: Each memory bank can store up to 60 readings. When
the number of readings exceeds 60, the oldest data will be
replaced with the new record.
To erase all stored measurements:
1. Press and release the MEMORY button. The unit will
display either U1 or U2 depending upon the user bank
selected and how many measurements are stored within that bank.
2. Select the desired user bank by pressing and releasing the MEMORY button.
3. Press and hold down the MEMORY button until two horizontal lines flash. This
indicates that all measurements within the selected memory bank have been erased.
17
Fig. 1
Fig. 2