Device Description; Initial Use; Basic Settings; Setting The Time - Beurer WL 80 Instrucciones De Uso

5. Device description

2
1
4
1 Display
2 Light area
3 Snooze function
( vibration of the device)
4 Keypad
Alarm button /
button
USB button /
button
Radio button /
■ button

6. Initial use

• Remove the packaging material.
• Check that all parts listed are present.
• Check the device, mains adapter and AUX cable for
damage.
• Place the device on a firm, even surface.
• Insert the mains adapter connector into the mains
adapter socket on the rear of the device.
• Insert the mains adapter into a suitable socket.
• The time is shown on the device display.
• Route the cable antenna of the device to the rear.
3
5
7
6
5 +/- buttons
6 Light button
7 Holder for smartphone /
MP3 player
AUX button /
button
Menu/Set
button
Securing the smartphone holder
1. Position the four latching
hooks of the holder onto the
four rectangular openings on
the wake up Light.
2. Press down the holder
with your right index finger
and use your left hand to
carefully slide the holder in
the direction of the arrow until
you hear and see it engage.
3. To remove, press the release
on the wake up Light and
carefully slide the holder in
the direction of the arrow.

7. Basic settings

In the basic settings, you can set the time (TIME), the alarm
properties for the set alarm times (ALARM 1, ALARM 2,
A L A R M 3 ), the display brightness (D I S P L A Y ), the
snooze duration (SN O O ZE) and the button tone (B E E P)
in the order stated here.

7.1 Setting the time

• When the device is switched on, press the
Menu/Set button. "T I M E" flashes in the display. Press
the Menu/Set button again.
• The hour mode "24 Hr" flashes in the display. Set hour
mode using the / buttons (24-hour mode or 12-hour
mode). Confirm using the Menu/Set button.
• The hour display flashes in the display. Set the hours
using the / buttons. Confirm using the Menu/Set
button.
• The minute display flashes in the display. Set the
minutes using the
Menu/Set button.
• The weekday display flashes in the display. Set the day
of the week using the
Menu/Set button.
Note
MO N = Monday, T U E = Tuesday, WE D = Wednesday,
T H U = Thursday, F R I = Friday, S A T = Saturday,
SU N = Sunday.
11
/ buttons. Confirm using the
/ buttons. Confirm using the