Installation; Connecting The Minibar Electrically - Dometic DM20D Instrucciones De Montaje

DM20
6

Installation

6.1 Notes on mounting into furniture
You can mount the minibar in four ways into furniture. Choose your favoured
alternative (fig. 5, page 5).
Observe the following:
• The cut-out dimensions H x W x D are:
– DM20D: 385 x 404 x 428 mm
– DM20F: 385 x 404 x 426+d mm
d is the thickness of the hotel's own decor
• The clearance between the minibar's back and the furniture wall should be
approx. 10 mm.
• The ventilation openings for the chosen alternative have to be produced (fig. 5,
page 5).
• Air passing through the inlet air duct must not be heated by any heat sources
(heaters, direct sunlight, gas ovens etc.).
➤ Fix the refrigerator in place using suitable screws (fig. 6 1 and 2, page 6).
6.2

Connecting the minibar electrically

➤ Plug the 120 V connection cable into the AC voltage socket and connect it to the
120 V AC mains supply.
✓ The status LED lights up.
✓ The minibar starts cooling the interior.
6.3 Mounting hotel's own door decor (DM20F only)
The hotel's own door decor has to comply with the following requirements:
• Maximum weight: 2 kg
• Maximum thickness: 14 mm
➤ Fasten the decor with four screws.
EN
Installation
17