Ideal LANTEK 6 Manual De Manejo página 337

DISPLAY HANDSET (DH)
1 Color Display 11 Shift Key
2 Option Keys 12 Backlight Key
3 Arrow/Enter Keys 13 On/Off Switch
4 AUTOTEST Key 14 Low-Crosstalk Connector
5 Wiremap Key Port
6 Length/TDR Key 15 Talkset Jack
7 Talk/Analyze Key 16 DC Input Jack
8 Help/Setup Key 17 PCMCIA Slot
9 Escape Key 18 USB Port
10 Alphanumeric Keys 19 DB-9 Serial Port
BATTERY AND POWER MANAGEMENT
Both the DH and RH use
interchangeable
rechargeable NiMH
battery packs.
Each handset can run
on battery power for
NiMH Batteries (2)
approximately 8 hours.
The handset batteries are recharged using the AC/DC Wall
Cube. Recharging can take up to 8 hours depending on the
battery level at the time of charging.
© 2002 IDEAL INDUSTRIES, Inc., Part No. 6510-30-0400 Rev. A
1 2-Line LCD Display
2 Hazard LED
3 Pass LED
4 Fail LED
5 On LED
6 Autotest Key
7 Escape Key
8 Tone Key
9 Talk Key
Cat 6 Channel Adapters (2)
AC Wall Adapters (2)
Cat 7 Channel Adapters (2)
Plug configuration
LANTEK 7 only
changes with country
Please note :
1: All patchcords (from IDEAL or 3rd party) have a limited lifetime due to the
wear on the connectors.
...
2: Good treatment of the patchcords increases their lifetime
REMOTE HANDSET (RH)
10 Shift Key
11 Backlight Key
12 On/Off Switch
13 Low-Crosstalk Connector
Port
14 Talkset Jack
15 DC Input Jack
16 DB-9 Serial Port
17 USB Port
ADAPTERS AND PATCHCORDS
Cat 6 RJ45 to RJ45
Cat 7 Tera to Tera
LANTEK 7 only
LANTEK 6/7 QUICK REFERENCE CARD
FUNCTION KEYS AND SOFT KEYS
Soft Keys
Function Keys
Four function keys positioned directly below the display allow
the user to select a soft key action on the Color Display.
LCD DISPLAY
1 Battery Meter or AC Cable
2 Talk Set Indicator
3 Storage Device Indicator
and Memory Usage
4 Screen Title
5 Time and Date
6 Cable Setting
7 Active Job Title
8 Function Title
†
9 Cable ID icon
10 Stored Test icon
11 Field Calibration icon
12 Preferences icon
13 Instrument Information
icon
14 Analyze icon
15 Fiber Optics icon
16 Cable Type icon
•