Kobalt KDD 524B-03 Manual De Uso página 67

SAFETY INFORMATION
• Know your power tool. Read the operator's manual carefully.
Learn the tool's applications and limitations, as well as the
specific potential hazards related to this tool. Following this rule
will reduce the risk of electric shock, fire, or serious injury.
• When battery pack is not in use, keep it away from other metal
objects like paperclips, coins, keys, nails, screws or other small
metal objects that can make a connection from one terminal
to another. Shorting the battery terminals together may cause
burns or a fire.
• Do not open the battery. There is risk of a short circuit.
• Battery tools do not have to be plugged into an electrical outlet;
they are always in operating condition. Be aware of possible
hazards when not using your battery tool or when changing
accessories. Following this rule will reduce the risk of electric
shock, fire or serious personal injury.
• Do not place battery tools or their batteries near fire or heat.
This will reduce the risk of explosion and possible injury.
• Do not crush, drop or damage the battery pack. Do not use a
battery pack or charger that has been dropped or received a
sharp blow. A damaged battery is subject to explosion. Properly
dispose of a dropped or damaged battery immediately.
• Batteries vent hydrogen gas and can explode in the presence
of a source of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product in the
presence of open flame. An exploded battery can propel debris
and chemicals. If exposed, flush with water immediately.
• Do not charge the battery in a damp or wet location. Following
this rule will reduce the risk of electric shock.
• For best results, your battery should be charged in a location
where the temperature is greater than 41°F (5°C) and less than
104°F (40°C). Do not store outside or in vehicles.
kobalttools.com
5