Soundcore Model Zero Manual Del Usuario página 5

EN
Play / Pause
× 1
Play Next Song
×2
Press to turn Bass Up on and off
× 1
Answer Call / End Call / Switch between a call on hold and an active
× 1
call
Reject Call
2s
End current call and answer incoming call / End current call and
2s
switch to call on hold
Switch audio source between Speaker and Phone
2s
Put current call on hold and answer incoming call
× 1
Activate Siri / Other Voice Control Software
2s
Volume Up / Down
Solid White (Bluetooth indicator)
Flashing Blue (Bluetooth indicator)
05
On a Call
Incoming Call
When turned on, Soundcore Model Zero will automatically connect
T
to the last connected device if available. If not, press the Bluetooth
pairing button to activate pairing mode.
To pair a different device, press the Bluetooth button to re-enter
pairing mode. Then repeat the pairing steps.
Having connection problems? Remove Soundcore Model Zero from
your device's Bluetooth history and ensure it's less than 3 feet away.
Then try pairing again. To get the best sound quality, make sure
there is a clear line of sight between the connected device and your
speaker.
b. Multi-point play
1. Connect the first mobile phone to your Soundcore Model Zero, press the
Bluetooth button once on Soundcore Model Zero after the connection is
successful.
2. Press the Bluetooth button on Soundcore Model Zero twice to enter
Bluetooth pairing mode.
3. Connect the second mobile phone to Soundcore Model Zero. Once the
second mobile phone is connected to Soundcore Model Zero, turn on the
Bluetooth of the first mobile phone, then find Soundcore Model Zero in your
pairing list. Click it for connection, make sure the connection is successful.
Note: Soundcore Model Zero can only play the music on one mobile phone at
a time.
EN
06