Power Supply - OK. ORD 110 Manual Del Usuario

POWER SUPPLY

If operation by mains power is not possible the radio can be powered by
batteries.
1 Operation by mains
1
2 Operation by batteries
OPERATION
Adjusting the antenna
2
For optimal reception, extend the antenna, move to fully extend
and adjust it.
Turning the unit on
Press the STANDBY button to turn the unit on.
Adjusting the volume
The volume can be adjusted during playback with the volume
control.
DAB RADIO
Press MODE to select DAB mode.
3
When the radio is switched on for the first time, it will automatically
do a full scan of DAB/DAB+ stations. The list of stations is then
stored, eliminating the need for another full scan when the radio is
turned on next time.
When the scan is complete, the stations are stored in alphabetical
order. The first available station will be played back.
Note
If there is no DAB reception at any time, change the position of the
unit or adjust the antenna.
IM_ORD110_170815_V04_HR.indb 19
Connect plug to suitable mains socket.
1. Open the battery compartment.
2. Insert 4 x 1.5 V battery (type AA, not included). Make sure the
polarity is correct as indicated.
3. Close the battery compartment.
Attention!
• Do not use this product with AC supply and battery
operation simultaneously.
• Remove all of the batteries when operating this product via
power supply.
19
EN
14/8/17 8:32 pm