Selecting Preset Dab Stations - OK. ORD 110 Manual Del Usuario

STORING DAB STATIONS
You can store up to 10 preset DAB/DAB+ stations.
1 Select the desired station.
2 Press and hold PRESET until <#: (Empty)> appears on the display.
3 Press
confirm the selection.
4 The preset number of the stored station is displayed.
5 Repeat steps 1 to 4 to store more DAB/DAB+ stations.

SELECTING PRESET DAB STATIONS

1 Press MODE to select the DAB/DAB+ mode.
2 Press PRESET to access the Preset menu "Preset Recall" <#: stored
station name>.
3 Use
selection by pressing SELECT.
USING THE DAB/DAB+ MENUS
In DAB mode press MENU/INFO for 1-2 seconds until display shows [Full
scan] and use
your selection press SELECT every time.
• <Full scan>
Searches for all available DAB/DAB+ stations.
• <Manual tune>
Manual tuning adjustment, for example aligning the antenna or
adding stations.
• <Prune>
Removes all invalid stations from the station list.
• <System>
PRUNE
Deleting inactive DAB stations
1 Press
2 Select <Yes> with
IM_ORD110_170815_V04_HR.indb 21
TUN/CH to preset a number from 1-10. Press SELECT to
TUN/CH
to select a preset number and confirm your
TUN/CH
to browse the menu options. To confirm
TUN/CH until <Prune> appears and confirm with SELECT.
TUN/CH
21
and confirm with SELECT.
EN
14/8/17 8:32 pm