Mitsubishi Electric PAR-CT01MAA-PB Libro De Instrucciones página 36

Function settings
5
36
Operation pattern setting screen will appear.
Press the button to move the cursor to the desired
F1
pattern number.
Move the cursor to the time, On/Off, or temperature
with the button.
F2
Change the settings with the
•
Time: settable in 5-minute increments
* Press and hold the button to rapidly advance the
numbers.
•
On/Off/Auto: Selectable settings depend on the model of
connected indoor unit. (When an Auto pattern is executed,
the system will operate in the Auto (dual set point) mode.)
•
Temperature: The settable temperature range depends on
the connected indoor units. (1ºC increments)
When the Auto (dual set point) mode is selected, two
preset temperatures can be set. If an operation pattern
with a single preset temperature setting is executed during
the Auto (dual set point) mode, its setting will be used as
the cooling temperature setting in the Cool mode.
Press the button to save the settings.
SELECT
A confirmation screen will appear.
Navigating through the screens
• To go back to the setting change/day of the week selection
screen .............................................
• To go back to the Main menu .........
• To return to the previous screen .....
will appear on the Status display and the Main
display in the Full mode when the weekly timer
setting for the current day exists.
The icon will not appear while the On/Off timer is
enabled or the system is under centralized control
(Timer operation from local remote controller is
prohibited).
or button.
F3 F4
button
SELECT
button
MENU
button
RETURN