Control Elements; General Safety Instructions; Safety Instructions For All Operations - Festool RENOFIX RG 150 E Manual De Instrucciones

Renovation Cutter RG 150 E – original instruc-
1 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Use protective goggles!
Wear ear protection!
Use protective gloves!
Read the instructions
Not to be included in municipal refuse
Advice or tip

2 Technical data
Nominal voltage
Mains frequency
Power input
Speed under load
Tool diameter
Weight
Protection class
3 Prescribed usage
The grinder is designed for the removal of plas-
ter, screed, tiles and remains of carpet adhesive
from concrete surfaces, the removal of shuttering
projections and for fl attening screed surfaces in
the building trade.
The grinder must only be used for dry processing
and combined with a powerful extraction system.
The user shall be liable for any damage resulting
from non-specifi ed use.
4

Control Elements

[1-1]
Extraction connector
[1-2]
Handles
[1-3]
Switches
GB
tion
220 – 240 V ~
50 / 60 Hz
1600 W
1000 – 2200 rpm
150 mm
5.9 kg
[1-4] Safety button
[1-5] Suction hood/base plate
[1-6] Vent openings
[1-7]
Speed selection thumbwheel
[1-8]
Longing screw
[1-9]
Locking button
[1-10] Lifting eye for balancer
[1-11] Material removal depth adjustment lever
Accessories that are illustrated or described here
are not always included in the scope of delivery.
The specifi ed illustrations can be found at the be-
ginning of the operating instructions.
5 Notes on Safety Prevention
5.1

General safety instructions

WARNING!
instructions, illustrations and specifi ca-
tions provided with this power tool. Failure
to follow all instructions listed below may result
in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
5.2

Safety instructions for all operations

Safety Warnings Common for grinding, surface
grinding or grinding with wire brush:
a) This power tool is intended to function as
a surface grinder or a cutter with a cutter
head. Read all safety warnings, instructions,
illustrations and specifications provided with
this power tool. Failure to follow all instruc-
tions listed below may result in electric shock,
fi re and/or serious injury.
II /
b) Operations such as polishing, cutting or abra-
sive cutting are not recommended to be per-
formed with this power tool. Operations for
which the power tool was not designed may
create a hazard and cause personal injury.
c) Do not use accessories which are not specifi -
cally designed and recommended by the tool
manufacturer. Just because the accessory can
be attached to your power tool, it does not as-
sure safe operation.
d) The rated speed of the accessory must be at
least equal to the maximum speed marked
on the power tool. Accessories running faster
than their rated speed can break and fl y apart.
e) The outside diameter and the thickness of
your accessory must be within the capacity
Read all safety warnings,
13