Service And Maintenance - Festool RENOFIX RG 150 E Manual De Instrucciones

9

Service and maintenance

WARNING
Risk of accident, electric shock
 Always pull the plug out of the socket before
performing any type of work on the machine.
 All maintenance and repair work which re-
quires the motor housing to be opened, must
only be carried out by an authorised service
workshop.
- Wrapped electric tools can be stored in a dry
place without heating, with temperatures not
lower than –5°C. Unwrapped electric tools can
only be stored in dry places with temperatures
not lower than +5°C, without sudden changes in
the temperature.
- To ensure the airfl ow is suffi cient, cooling
openings of the motor must be always clean
and free.
- The machine is equipped with special self-
disconnecting brushes. When the brushes are
worn, the power supply is automatically discon-
nected, and the machine is stopped.
- If the suction fl ange height adjustment system
does not operate smoothly, the fl ange must be
removed and cleaned.
Customer service and repair. Only
through manufacturer or service
workshops: Please find the nearest
address at: www.festool.net/service
Use only original Festool spare parts!
EKAT
4
Order No. at:
5
3
2
1
www.festool.net/service
10 Environment
Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible re-
cycling centre! Observe the valid national regula-
tions.
EU only: In accordance with European Directive on
waste electrical and electronic equipment and im-
plementation in national law, used electric power
tools must be collected separately and handed in
for environmentally friendly recycling.
Information on REACh:
www.festool.com/reach
11 EU Declaration of Conformity
Renovation Cutter
RG 150 E
Year of CE mark: 2013
We declare under sole responsibility that this
product comply with all relevant requirements
of the following directives, norms or normative
documents:
2006/42/EG, 2004/108/EG (until 19.04.2016),
2014/30/EU (from 20.04.2016), 2011/65/EU,
EN 60745-1:2009, EN 60745-2-3:2011+A2:2013,
EN 55014-1:2006+A1:2009+A2:2011, EN 55014-2:
1997+Corrigendum 1997+A1:2001+A2:2008, EN
61000-3-2:2006+A1:2009+A2:2009, EN 61000-3-
3:2013.
Festool GmbH
Wertstr. 20, D-73240 Wendlingen
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation
2015-03-02
Serial no.
768916, 768884
19