Intended Use; Technical Data; Machine Features - Festool KA 65 Manual De Instrucciones

GB KA 65
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
2

Intended use

The edge bander is suitable for:
– Attaching edge bands made of wood, materials
similar to wood and plastic using Festool adhe-
sives.
The user is liable for improper or non-in-
tended use; this also includes continuous in-
dustrial operation.
3

Technical data

Edge bander
Power
Power supply
Mains frequency
Edge height
Edge thickness
Inner radius
Heating time
Default melting tem-
perature setting
Melting temperature
setting range
Feed speed
Safety class
Weight (without adhe-
sive cartridges and
mains cable)
* Depending on material
16
KA 65
1200 W
220 - 240 V~
50/60 Hz
18 - 65 mm
0,5 - 3,0 mm
> 50 mm
approx. 8 min
Setting 1 190 °C
Setting 2 200 °C
Setting 1/2 100 - 210 °C
1st gear 2 m/min
2nd gear 4 m/min
7,9 kg
4 Symbols
Symbol Significance
Warning of general danger
Risk of electric shock
Warning: Hot surface!
Risk of pinching fingers and hands!
Read operating instructions and safety
notices!
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Do not dispose of with domestic waste.
Tip or advice
Handling instruction
*
*
5

Machine features

*
[1-1]
Start button
[1-2]
Feed speed button
[1-3] Handle
[1-4]
Rotary knob for adjusting the edge
height
[1-5]
Mains power cable
[1-6] Extractor connector
[1-7] Switch for temperature selection
[1-8]
On/Off switch
I
[1-9] Safety lever for purging
[1-10] Inlet roller
[1-11]
Edge inlet
[1-12] Central plate
[1-13] Drip catcher
[1-14]
Adhesive nozzle
[1-15]
Contact roller
[1-16] Handle
[1-17]
Support base with start marking
[1-18]
Flap
[1-19] Menu buttons