CARE AND MAINTENANCE
1.
Disconnect the cuff tubing from the monitor and remove batteries prior to storing.
2.
To clean the monitor, use a soft cloth and mild detergent to lightly wipe clean. Use a damp
cloth (water) to remove dirt and excess detergent.
3.
To clean the cuff, do NOT soak in water. Apply a small amount of rubbing alcohol to a soft
cloth to clean the cuff's surface. Use a damp cloth (water) to wipe clean. Allow cuff to air dry
at room temperature. Do not use petrol, thinners or other similar solvents. Never dry the cuff
in clothes dryer or iron it.
4.
Do not store the unit where it will be exposed to direct sunlight, dust or humidity. Avoid
extreme temperatures.
5.
Never disassemble the monitor or cuff.
6.
Dropping or subjecting your blood pressure monitor to strong shocks should be avoided.
7.
No component of the monitor should be serviced by the user.
8.
It is recommended for the performance to be checked every 2 years.
9.
The monitor can maintain the safety and performance characteristics for a minimum of
10,000 measurements or 3 years.
20