Switch On/Off; Volume Control; Checking Battery Status - Festool SYSROCK BR 10 DAB+ Manual De Instrucciones

vice only consumes power from this
battery pack.
CAUTION Always attach the battery
pack completely. If not, it may acci-
dentally fall out of the battery bay,
causing injury to you or someone
around you.
CAUTION Do not force attach the bat-
tery pack. If the battery pack does not
slide in smoothly and does not en-
gage, it is not being inserted correct-
ly.
CAUTION For optimal performance,
we recommend connecting to an 18V
Li-Ion battery pack.
5.3

Switch on/off


To switch on: Press the power but-
ton [1-6].
The radio is ready for operation.

To switch off: Press the power but-
ton [1-6].
5.4

Volume control

Press the volume control [a]
and [k] to adjust the desired
volume.

For a better sound quality using
an external device, adjust the
volume on the external device
to maximum 70%.
5.5

Checking battery status

To check the current battery level,
press the power button [1-6] to
switch on the radio. The battery sta-
tus indicator [e] will show the current
battery level (only with Li-Ion battery
pack).
Battery is fully charged
Battery is partially
charged
Battery low - charging
required
battery critical - alterna-
tive power source
required immediately.
5.6 Operating your radio - DAB

Straighten up the antenna [1-3].

Press the Power button [1-6] to
switch on your radio.

Press the source button [j] until
the DAB mode is selected.
If this is the first time the radio is
used, a quick scan of Band III DAB
channels will be carried out. If the ra-
dio has been used before, the last
used station will be selected.
GB
BR 10 DAB+
23