Operating Your Radio - Fm - Festool SYSROCK BR 10 DAB+ Manual De Instrucciones

GB
BR 10 DAB+
Clear stations (Prune function)- DAB
If you move to a different part of the
country, some of the stations which
were listed may no longer be avail-
able. Also from time to time, some
DAB services may stop broadcasting,
or may change location or frequency.
Stations which cannot be found, or
which have not been received for a
very long time are shown in the sta-
tion list with a question mark. The
Prune stations function (Clear) [i] will
delete the marked DAB stations from
your station list.

Press the Power button [1-6] to
switch on your radio.

Press the source button [j] until
the DAB mode is selected.

Press and hold Clear button [i]
more than 2 seconds until <DAB> is
shown on the display.

Press and release the Tuning con-
trol [i], [h] to select <Clear> or
<Back>. If you do not wish to enter
the Prune function select <Back>,
and press and release the Select
button [g] to confirm the setting.

To enter the Prune function select
<Clear>, and press and release the
Select button [g] to enter the set-
ting. Press and release the Tuning
control [i], [h] to select <YES> or
<NO>. To activate the Prune func-
26
tion select <YES> and press the Se-
lect button [g] to confirm the set-
ting. If you do not wish to prune
stations, select <NO> and then
press Select button [g] to confirm
the setting.

NOTE: If you have moved your
radio to a different part of the
country you should also carry
out a search for new stations
(please see the section 'Finding
new stations').
5.7

Operating your radio - FM


Straighten up the antenna [1-3].

Press the source but-
ton [j] until the FM mode
is selected.
FM auto-tune

Press and hold (~2 sec.) the Tuning
control [i], [h] to carry out an auto-
tune.
Your radio will stop scanning when it
finds a station of sufficient strength.
The display will show the frequency
of the signal found. If the signal is
strong enough and there is RDS data
present, the radio may display the
station name, radio text and clock
time.
Finding other stations

Press the Tuning control [i], [h] as
before.