Listening To Music Via Blue- Tooth Streaming - Festool SYSROCK BR 10 DAB+ Manual De Instrucciones

GB
BR 10 DAB+

If no RDS-signal is received, the
clock time is not shown.
5.10 Listening to music via Blue-
tooth streaming
You need to pair your Bluetooth de-
vice with your SysRock before you can
auto-link to play/stream Bluetooth
music through your SysRock. Pairing
creates a "bond" so two devices will
recognize each other and establish a
link that enables data transfer.
Pairing your Bluetooth device for the
first time

Press the Source button [j] to se-
lect the Bluetooth mode.
The Bluetooth status icon
flashes to show the SysRock
is discoverable.

Activate Bluetooth on your mobile
device according to the device's
user manual to link up to the Sys-
Rock.

Locate the Bluetooth device list
and select <SysRock DAB>. Some
mobile devices
equipped with bluetooth interfaces
older than the BT2.1 standard.), re-
quire entering the pass code
"0000".
28
(which are
Once the connection is es-
tablished,
icon will cease flashing and
display a check mark next to it. Sim-
ply select and play any music from
your source device.

NOTE:
– If two Bluetooth devices, which
are not yet paired to the SysRock
both simultaeneously search for
your SysRock, it will show its
availability on both devices. How-
ever, if one device establishes a
connection with the SysRock first,
then the other Bluetooth device
won't find it on its list.
– If you take your source device out
of range, the connection will be
temporarily lost. Your SysRock
will automatically reconnect, if
the source device is brought back
in range. Be aware that while the
connection is lost, no other Blue-
tooth device can pair or link with
your SysRock.
– If <SysRock DAB> shows in your
Bluetooth device's list but your
device cannot connect with it,
please delete the item from your
list and pair up the device with the
SysRock again following the steps
described previously.
the Bluetooth