Controls And Led - Stihl SE 133 ME Manual De Instrucciones

3 Overview
1 Top part
The top part contains the controls, the electric motor and
the filters.
2 Retainer
The retainer attaches various makes of tool box to the
top part of the wet/dry vacuum cleaner.
3 Holders
The holders are used to store the connecting cord or the
suction hose.
4 Cooling air filter
The cooling air filter filters out dust and dirt from the
cooling air drawn in by the electric motor.
5 Lock
The lock connects the top part with the container.
6 Container
The container collects dust, dirt and liquid that are picked
up.
7 Bottom carrying handles
The bottom carrying handles are used when carrying the
wet/dry vacuum cleaner.
8 Front wheels
The front wheels are used to move and transport the wet/
dry vacuum cleaner.
9 Brakes
The brakes immobilize the front wheels.
10 Container cap
The container cap closes the suction connector.
11 Suction connector
The suction connector connects the suction hose to the
container.
12 Top carrying handle
The top carrying handle is used when carrying and
moving the wet/dry vacuum cleaner.
13 Mains plug
The mains plug connects the connecting cord to a
socket.
0458-660-9621-A
14 Connecting cord
The connecting cord connects the wet/dry vacuum
cleaner to the mains plug.
15 Filter housing cap
The filter housing cap closes the filter housing.
16 Rubber strap
The rubber strap is used to store the connecting cord or
the suction hose.
17 Float
The float switches off the wet/dry vacuum cleaner when
the container is full of liquid.
18 Clip
The clip conducts away static charge.
19 Filter
The filter filters out dust and dirt from the air drawn in.
# Rating plate with serial number
3.2

Controls and LED

3
2
1 Socket
The socket supplies a connected electric power tool with
energy.
2 LED
The LED indicates that the air velocity in the suction hose
is too low.
English
4 5
1
33