Fitting And Removing Suction Hose; Attaching The Suction Hose; Removing The Suction Hose; Fitting And Removing Hand Tube And Adapter - Stihl SE 133 ME Manual De Instrucciones

Ocultar thumbs Ver también para SE 133 ME:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 86
6 Assembling the wet/dry vacuum cleaner
► Lift off the top part.
2 5
2
1
► Pull the sleeve (1) off the suction connector (2).
► Close the sleeve (1) with the slide (5).
► Tie up disposal bag (3) with the tape (4).
► Remove disposal bag (3) from the container.
► Dispose of the disposal bag (3) in accordance with the
applicable regulations and in an environmentally
responsible manner.
6.4

Fitting and removing suction hose

6.4.1

Attaching the suction hose

2
► Pull off the container cap (1).
► Push sleeve (2) into the suction connector (3) and turn
until it is firmly seated.
0458-660-9621-A
3
4
3
1
6.4.2

Removing the suction hose

3
1
► Pull the sleeve (1) out of the suction connector (2).
► Push container cap (3) into suction connector (2).
6.5

Fitting and removing hand tube and adapter

6.5.1

Fitting the hand tube or adapter

1
► Push hand tube (1) or adapter (3) into the sleeve (2).
The hand tube (1) or adapter (3) engages audibly.
2
2
3
English
43

Publicidad

Tabla de contenido
loading

Tabla de contenido