Hazard Sources - Bartscher MFG 7340 Manual Del Usario

2.2 Hazard sources

WARNING! Electric shock hazard!
In order to avoid electric hazard it is required to follow the safety instructions below.
Do not use the device in case of incorrect operation, damages, or dropping on
the floor.
Periodically inspect the electric supply cable for damages. Do not use the device
with the damage symptoms. In order to avoid the hazard the electric supply cable
should be replaced by the service company or qualified electrician.
Never open the device housing, Touching of live connections and wires may
cause the electric shock.
Never immerse the electric supply cable in water or other liquids.
Never operate the device with wet or moist hands.
Disconnect the device from the electric power supply:
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
-
Do not clean the device with water jets or pressure washer. Water may penetrate
the housing, damage the electric elements, and cause electric shock.
WARNING! Burn hazard!
To avoid burns follow the instructions below.
Never touch hot surfaces of the electric oven and gas burners. Use the
protective clothes or gloves.
During the device operation keep the children away.
WARNING! Suffocation hazard!
To avoid the hazard results follow the instructions below.
Prevent access of children to the package materials like plastic bags
and foamed polystyrene elements.
- 33 -