Datalogger Configuration - Promax PROPOWER - 5 Manual De Instrucciones

To print the stored measurement select the PRINT field, previously consult
section 4.3 Connecting to a computer or a printer.
4.2.6.1

Datalogger configuration.

From the LOGGER
pressing the CONFIG key [14] we will accede
to the configuration menu. This menu permits
to modify the THRESHOLD
parameters. To accede to them turn the rotary selector
and once the parameter we want to change is
appears shadowed, press it; then turning it its
value will be modified. Finally press it again to
validate the new value.
a) THRESHOLD: It activates / deactivates the measurement threshold.
This parameter allows to carry out the logger function in an agile way, by
activating only those measures we consider significative.
In the OFF mode (deactivated) all measurements are taken (with a level
higher than 0 dBm). On the other hand, when a level is defined, only those
channels with a level higher than the THRESHOLD value will be measured.
b) MODE: It defines the types of measurements to be taken.
This parameter allows to select the measurements that are desired to made
between:
- POT: Potencia detectada en el conal digital PLC
- POT/CN: Level and Carrier to Noise ratios.
Page 28
PROPOWER-5
LOGGER NUMBER
DATE: 08:55
CHANNEL PLAN:
UNITS:
THRESHOLD:
NOISE FREQ.:
CHAN FREQ PWR
UL12 3.25
DL13 3.25
UL14 3.25 -10
UL1 3.75 -15
DL4 4.37
UL5 6.50 -18
DL6 6.50
DL12 6.75
UL13 6.75
DL14 7.37 -13
UL7 7.75 -16
DL8 7.75
Figure 32.- Example of print.
mode, when
and MEASURES
USER'S MANUAL. PROPOWER-5
10
12-09-2004
IBER
dBm
OFF
BW/2
C/N
16 52
13 33
15
18
20 44
20
11 34
19 >37
20 >42
10
13
Figure 33.- Logger configuration menu.
07/2006