Acquisition Function (Datalogger) - Promax TV Explorer HD Manual De Usuario

USER'S MANUAL. TV EXPLORER HD / HD
The TV EXPLORER
pertaining to the active channel plan by means of the horizontal cursors [6]
From this way, once selected the channel-tuning field
and MEASUREMENTS
entire active channel list.
NOTE:
The icon
equipment is carrying out an internal operation and user must wait to
complete it.
5.10

Acquisition function (DATALOGGER)

The Datalogger function allows the user to carry out and store measurements in a
fully automatic way. It can store for each acquisition the measurements made in different
points of the installation. The measurements made are relevant to the current analogue
or digital channel, in the active channel plan.
To select the Datalogger function, activate the UTILITIES
select the RUN DATALOGGER option. Later, by turning the rotary selector [1] select a
previously stored acquisition or a NEW DATALOGGER.
During analogue channel measuring process, a percentage counter appears at the
bottom of the screen showing the percentage of channel measurement done. In the case
of digital channels, appears a timer showing time left to finish in seconds. At the top left
corner appears the channel being measured followed by the total amount of channels in
the current channel plan.
05/2011
LE
HD / HD allows directly changing the tuned channel
LE
[12] operation modes is possible to check cyclically the
in the upper corner of the screen indicates that the
Figure 12.- DATALOGGER screen.
[24] and in the TV
[22] menu and
Page 35
key.
[10]