MicroPower MTM-HF 3200 Instrucciones De Uso página 5

Installation
Only an authorised installation engineer may carry out the installation.
The battery charger should be installed indoors in a space with a vapour barrier.
Locate the battery charger so that there is free circulation of air through the battery
charger's ventilating openings.
Mount the battery charger vertically suspended on the wall with the bracket
provided, see illustration. Dimensions for free space around the battery charger
should fall below those specified.
• Battery charger MTM-HF 3200 requires at least 300 mm of free space around
the battery charger.
• Battery chargers MTM-HF 6000 and 5000 require at least 300 mm of free
space above, below and to the left of the battery charger.
English
5