Information On The Operating Instructions; Intended Use; Representation And Layout Of Warning Instructions; Initial Operation - HellermannTyton MST6 Manual De Instrucciones

Information on the operating instructions

1 Information on the operating instructions
These operating instructions apply to the MST6 application tool only.
Please read these instructions carefully and ensure that they are
understood by any persons using the tool.
Within this document you will find images illustrating best practice
guidelines for operating and maintaining the MST6 application tool, along
with contact details for your local HellermannTyton country representative.

2 Intended use

The MST6 tool is intended for the application of MST-S series metal ties.
The tool is not suitable for use with alternative cable ties (e.g. plastic) and
must also not be modified or interfered with by any user.
We are not liable for any damage and claims arising from the improper
operation or use of the cable tie installation tool, nor are we responsible
for any damages caused by defects resulting from inappropriate or
unsuitable use of the tool, incorrect or careless treatment, normal wear
and tear as was as any modifications made to the tool by the customer of
a third party.
The warranty/repair by HellermannTyton does not include the rectification
of faults that results from force majeure, external influences, customer
neglect (e.g. modifications or attachments, application errors etc) or the
influence of third parties. The replacement of worn parts or spare parts
during or after maintenance work carried out according to
HellermannTyton instructions is also not included.
The application tool must only be operated when in a technically sound
condition.

3 Representation and layout of warning instructions

The hazard level with the associated warning symbol and explanation are
illustrated below.
CAUTION
Possible risk of injury.
NOTICE
Possible risk of damage to property or environmental damage.

4 Initial operation

The application tool can be used immediately.
f Take the application tool out of the packaging and check it for damage.
If damaged, inform the supplier in writing immediately.
Operating instruction • MST6 • 10-2015 • 031-93244
5