Information About The Operating Instructions; Intended Use; Representation And Layout Of Warning Instructions; Initial Operation - HellermannTyton EVO7 Manual De Instrucciones

Information about the operating instructions

1 Information about the operating instructions
These operating instructions apply for the EVO7 / EVO7SP application tools only. Please read these
instructions carefully and ensure that they are understood by any persons using the tool.
Within this document you will find images illustrating best practice guidelines for operating and
maintaining the EVO7 / EVO7SP application tools, along with contact details for your local
HellermannTyton country representative.

2 Intended use

The EVO7 / EVO7SP tool is intended for the application of both inside-serrated and outsideserrated
nylon cable ties.
The tool is not suitable for use with alternative cable ties (e.g. metal) and must also not be
modified or interfered with by any user.
We are not liable for any damage and claims arising from the improper operation or use of the
cable tie installation tool, nor are we responsible for any damages caused by defects resulting from
inappropriate or unsuitable use of the tool, incorrect or careless treatment, normal wear and tear
or any modifications made to the tool by the customer of a third party.
The warranty/repair by HellermannTyton does not include the rectification of faults resulting from
force majeure, external infl uences, customer neglect (e.g. modifications or attachments,
application errors etc) or the infl uence of third parties. The replacement of worn parts or spare
parts during or after maintenance work carried out according to HellermannTyton instructions are
also not included.
The application tool must only be operated when in a technically sound condition.

3 Representation and layout of warning instructions

The hazard level with the associated warning symbol and explanation are illustrated below:
CAUTION
Possible risk of injury.
NOTICE
Possible risk of damage to property or environmental damage.

4 Initial operation

The application tool can be used immediately.
f Take the application tool out of the packaging and check it for damage. If damaged, inform the
supplier in writing immediately.
4
Operating instruction • EVO7 • 12-2014 • 031-93157