Grundig GSB 910 S Manual Del Usuario página 29

aUX­/­HdMI­arC­/­OPtICaL­OPEratION­ _ ______
1
Ensure that the unit is connected to the TV or audio
device.
2
Press the button on the unit repeatedly or
(SOUrCE)
on the remote control to select
OPtICaL,­HdMI­arC­mode.
3 Operate your audio device directly for playback
features.
4 Press the VOL­ +/– button to adjust the volume to
your desired level.
tip:
While in HdMI­ arC,­ OPtICaL
there's no sound output from the unit and the status
indicator flashes quickly, you may need to activate
PCM signal output on your source device (eg. TV,
DVD or Blu-ray player).
BLUEtOOtH­OPEratION­ _____________________
Pair­Bluetooth-enabled­devices
The first time you connect your bluetooth device to
this player, you need to pair your device to this
player.
Note:
The operational range between this player and a
7
Bluetooth device is approximately 8 meters (without
any object between the Bluetooth device and the
unit).
Before you connect a Bluetooth device to this unit,
7
ensure you know the device's capabilities.
Compatibility with all Bluetooth devices is not gua-
7
ranteed.
Any obstacle between this unit and a Bluetooth de-
7
vice can reduce the operational range.
If the signal strength is weak, your Bluetooth receiver
7
may disconnect, but it will re-enter pairing mode au-
tomatically.
to­connect­your­device­to­the­unit­via­
Bluetooth,­follow­the­steps­below:
1 During ON mode, press the
peatedly or the (SOUrCE)­button on the remote
control to select Bluetooth mode. The­BLUEtOOtH­
indicator will light flash.
2 Activate your Bluetooth device and select the search
mode.
"Grundig­GSB­910­S"
will show up in Bluetooth search list.
If you cannot find the unit, press and hold the
7
aUX,­
mode, if
button on the unit re-
or "Grundig­dSB­970"­
» «
button on the remote control to be searchable.
The system has entered pairing mode. You will hear­
audio prompt­ from the unit and the
indicator will flash quickly.
3 „Grundig­GSB­910­S"
Select
970"
in the pairing list. After audio prompt, the sys-
tem is successfully connected and the Bluetooth indi-
cator will light up solidly.
4
Play music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can :
Switch to another function on the unit.
7
Disable the function from your Bluetooth device.
7
The Bluetooth device will be disconnected from the
soundbar after audio prompt.
»
Press and hold the
7
control.
tips:
"0000"
Enter for the password if necessary.
7
If no other Bluetooth device pairs with this player wi-
7
thin two minutes, the player will recover its previous
connection.
The player will also be disconnected when your de-
7
vice is moved beyond the operational range.
If you want to reconnect your device to this player,
7
place it within the operational range.
If the device is moved beyond the operational range,
7
when it is brought back, please check if the device is
still connected to the player.
If the connection is lost, follow the instructions above
7
to pair your device to the player again.
BLUEtOOtH
„Grundig­dSB­
to
«
button on the remote
29­
ENGLISH