Operating And Display Elements; Initial Start-Up - HSM Securio P40 Instrucciones De Servicio

Operating and display elements

Note: Depending on the machine version,
not all functions may be available.
Indicator: door open
or safety element not latched
Indicator: overload
(paper jam)
Indicator: paper/CD
container full
4

Initial start-up

WARNING
Dangerous mains voltage!
Improper handling of the machine can lead to
an electric shock.
• Only use the machine in a dry room indoors.
Never operate the machine in damp rooms
or in the rain.
• Keep the machine, the plug and cable
away from open fi re and hot surfaces. The
ventilation slots must not be blocked or
covered and there must be at least 5 cm
space between the shredder and any wall
or furniture.
• Make sure that the power plug is easily
accessible.
• Before you insert the power plug, make
sure that the voltage and frequency of your
power supply comply with the information
on the name plate.
09/2015
• Before starting up the machine for the fi rst
time, open the door and remove the two wing
nuts of the transport locks from the base
plate under the cutting unit.
• Connect the power plug of the machine into
a properly installed socket.
SECURIO P 40
english
R button:
• Cutting unit runs in reverse
• Error acknowledgement
• Software version display (for
service technicians only)
Indicator: oil reservoir empty
Function button
"On/off/start"
Indicator: metal detection
Indicator: button lock
Indicator: ready for operation /
Stand-by
13