Tabla De Contenido; Explanation Of Symbols - WAGNER 915e POWER STEAMER Manual Del Propietário

IMPORTANT SAFETY INFORMATION
TABLE OF CONTENTS
IMPORTANT SAFETY INFORMATION ______________2-4
Explanation of Symbols __________________________ 2
Grounding Instructions __________________________ 3
Extension Cords ________________________________ 3
Safety Hazards _________________________________ 3
QUICK START REFERENCE GUIDE __________________ 4
FILLING THE WATER TANK ________________________ 5
STEAM GUN OPERATION _________________________ 6
ASSEMBLING AND ATTACHING ACCESSORIES ______ 7
STRAIGHT ADAPTER ACCESSORIES ________________ 8
ANGLED ADAPTER ACCESSORIES _________________ 9
CLEANING AND STORAGE _______________________ 10
MINERAL DEPOSITS ____________________________ 11
TROUBLESHOOTING ____________________________ 12
WARRANTY ____________________________________ 13
PARTS LIST _________________________________ 38-40

EXPLANATION OF SYMBOLS

Read all safety information before operating the equipment.
Save these instructions.
To reduce the risks of fire or explosion, electrical shock and
the injury to persons, read and understand all instructions
included in this manual. Be familiar with the controls and
proper usage of the equipment.
This symbol indicates a potential hazard

that may cause serious injury or loss of life.
Important safety information will follow.
This symbol indicates a potential hazard

to you or to the equipment. Important
information that tells how to prevent
Attention
damage to the equipment or how to avoid
causes of minor injuries will follow.
HOT STEAM AND PARTS. May cause

injury, including skin burns or property
damage. Temperatures exceed 212˚ F
(100˚ C).
FIRE.
May cause severe injury and/or

property damage
ELECTRIC SHOCK.

injury.
i
Notes give important information which

should be given special attention.
2
GROUNDING INSTRUCTIONS
This product should be grounded. In the event of an electrical
short circuit, grounding reduces the risk of electric shock by
providing an escape wire for the electric current. This product
is equipped with a cord having a grounding wire with an
appropriate grounding plug. The plug must be plugged into
an outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
If repair or replacement of the cord or plug is necessary, have
your nearest Wagner Authorized Service Center replace it.
Check with a qualified electrician or serviceman if the
grounding instructions are not completely understood, or if in
doubt as to whether the product is properly grounded. Do not
modify the plug provided; if it will not fit the outlet, have the
proper outlet installed by a qualified electrician.
EXTENSION CORDS
Use only a 3-wire extension cord that has a 3-blade grounding
plug, and a 3-slot receptacle that will accept the plug on the
product. Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one heavy
enough to carry the current your product will draw. An
undersized cord will cause a drop in line voltage resulting in
loss of power and overheating. For lengths up to 100 feet, use
14 AWG extension cords.
May cause severe
EN
WARNING - Improper installation of the
grounding plug can result in a risk of electric
shock.
Grounded
Outlet
Adapter
Tab and
Grounding
Screw
Grounded
Outlet Box