STEAM GUN OPERATION
1
TRIGGER
ON
The steam output is controlled
through the steam handle. The
handle has both a steam trigger and
red safety switch.
For intermittent steam generation
press the red safety switch to the ON
position. Pull the trigger to release
steam.
REBUILDING STEAM PRESSURE WHILE IN USE
1
Red
If the orange steam light comes on
during use, it indicates the machine
needs to re-build pressure in the
tank. The machine may still be used
while pressure rebuilds.
6
2
For continuous steam generation:
(A) Start by pressing the red safety switch to the ON position, pull the trigger
and then press the safety switch to LOCK. The trigger is now locked into
continuous steam mode.
(B) To unlock from continuous steam mode, release the trigger and press the red
safety switch back to the ON position.
Orange
HOT STEAM AND PARTS.
May cause injury, including skin burns or
property damage. Temperatures exceed 212˚
F (100˚ C).
Burns can occur from hot water or steam.
DO NOT touch the steam nozzle or attempt
to connect accessories while unit is in use.
NEVER direct the steam at a person, pet or
electrical device.
EN