System settings
Register products
H
The products must be registered in the interface/repeater
unit to be operational.
The interface/repeater unit can register:
-
From a VELUX remote control KLR 100 (pages 22-23)
-
Directly from a new product (page 24)
-
From a control keypad KLI 110 (page 25)
the registration takes place in 2 steps.
Step 2 must be completed within two minutes after
implementing step 1, so please read steps 1-2 before
proceeding.
H
Registration from a remote control KLR 100
If you have a VELUX remote control, you can copy the
registered products from the remote control to the inter-
face/repeater unit.
Note: All products can be copied to the interface/repea-
ter unit, but Groups, Zones and program functions cannot.
The products to be operated through the interface/repea-
ter unit are to be chosen in submenu "Select products".
The example shows how to copy from a VELUX remote
control B to interface/repeater unit A.
22 VELUX
ENGLISH
B
A